Herti Miawarni


VLC technology continuously developed until now. Development ranging from modulation system, basic infrastructure, up to complex networks. In this research conducted an experiment in terms of basic infrastructure which Diffuse LED is used as the main component on VLC receiver. The purpose of this research is to design and then analyze in an effort to build the basic infrastructure of VLC. Experiment performed on a simple modulation system for easy analysis process. For more simplicity, Color Intensity Modulation using only two colors: red and blue to present the logic high and low. From trials that have been done, Diffuse LED that used as the main component in the Receiver Unit has performed well in the period of the signal greater than or equal to 20 uS. In these conditions, BER reaches 0%. So in other words the shortest period of signal reaches a maximum of 20 uS and maximum bit rate of 100 Kbps. And then observations using the oscilloscope showed that in the same signal period, information signal shape that has been received are similar with the shape of signal that has been sent. Overall results, VLC system that has been designed and analyzed suitable for low bit rate communication.

Teks Lengkap:



Ahn, K.I. and Kwon, J.K. (2012). Color Intensity Modulation for Multicolored Visible Light Communications, IEEE Photonics Technology Letters, Vol. 24, No. 24, pp 2254-2257.

Arnon, S. (2016). Visible Light Communication, 1st edition, Cambridge University Press, United Kingdom.

Delgado, F., Quintana, I., Rufo, J.A, Rabadan, Quintana, C., and Jimenez, R.P, (2010). Design and Implementation of an Ethernet-VLC Interface for Broadcast Transmissions, IEEE Photonics Technology Letters, Vol.14, No. 12, pp 1089-1091.

Ghassemloy, A., Popoola, W., and Rajbhandari, S, (2013). Optical Wireless Communication, System And Chanel Modelling With MATLAB, CRC Press Taylor & Francis Group, Chapt.4, no.239.

Pradana, A., Ahmadi, N., Adiono, T., Cahyadi, W.A, and Chung, Y.H. (2015). VLC Physical Layer Design based on Pulse Position Modulation (PPM) for Stable Illumination, International Symposium on Intelligent Signal Processing and Communication Systems (ISPACS), pp. 368-373.

Rossiter, J. and Mukai, T. (2005). A Novel Tactile Sensor Using a Matrix of LEDs Operating in Both Photoemitter and Photodetector Modes, IEEE Sensor ICSENS.

Shin, H., Park,B., Jung, D.K, Lee, Y.M, Song, S., and Park, J. (2011). VLC Transceiver Design for Short-Range Wireless Data Interfaces, IEEE ICTC, pp. 689-690.

Stepniac, G., Kowalczyk, M., Maksymiuk, L., and Siuzdak, J. (2015). Transmission Beyond 100 Mbit/s Using LED Both as a Transmitter and Receiver, IEEE Photonics Technology Letters, Vol. 27, No. 19, pp 2067-2070.

Tri, T.H., (2011). Theory And Design Of Digital Communication System, Cambridge University Press, Chapt.6, page.236, United Kingdom.


  • Saat ini tidak ada refbacks.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.